The NonVi Flex is a composite consisting of a profile half welt with a hotmelt-coated fabric tape and a foam profile.During application, the fabric tape is bonded with the fabric edge of the hanging. Depending on the material, this can be carried out using bonding or sewing technology.

The flexible foam element enables simple, time and above all space-saving installation. The NonVi Flex does not have to be inserted longitudinally, rather it can be pushed directly into the groove in the fabric shaft from the wide side. The foam element produces a clamping effect in the fabric shaft, which is an enormous advantage, especially when replacing the fabric or performing an overhead installation.

Applications include connections between textiles and fabric shafts of all kinds. Processing can be carried out using ultrasonic or sewing technology, hot air, hot wedge, high frequency or thermal impulse.

Application Areas

• Fabric shaft side of textile sun protection and other hangings.

• Interior and exterior sun protection

• Acrylic, polyester, screens, Soltis and other coated fabrics.

• Bonded or sewn onto the fabric edge.

• Special features

  • Extremely easy processing with traditional machines.

  • Because the NonVi Flex is joined directly with the fabric edge, which is then completely inserted into the profile, it ensures a seamless transition from the fabric to the profile. This creates an appealing appearance without shadowing due to double plies of fabric.

  • It is available in various sizes and suitable for virtually any profile.

  • By dispensing with the traditional fabric fold, the NonVi Flex saves material.

  Product variants

  • 4, 6, 7, 8 mm diameters

  • Other sizes available on request

  • With adhesive film for joining with acrylic/polyester

  • With adhesive film for joining with PVC

  • Main component:
    2 PVC half welts with fabric tape
    Properties:
    bonded
    Shore hardness:
    85
    Welt diameter:
    6 mm, 7 mm, 8 mm
    Standard colour:
    grey